Polymaxx SR 7000 is widely accepted for bonding different substrate like Footwear, Bus Body, Plywood, Metal, AC Ducting etc.

  • High Coverage
  •  High adhesion
  •  Ready to Use
  •  Resistant to the effects of water
  •  Suitable for most substrates
  •  Ease in spreadibility
  •  Silicon and Benzene free
  • Footwear
  •  Duct Insulation (Nitrile rubber to Metal)
  •  Upholstery
  •  Automotive, Helmet
  •  Furniture
  •  Luggage
Pack Size 500 ml 1 Litre 5 Litre 30 Litre
No. Of PCS in a Carton 48 24 4 1
  • Clean & roughen the surface of the substrate to be bonded
  • Stir the adhesive well before use
  • Apply a thin coat of adhesive on both the substrates
  • Remove the excess adhesive if any
  • Allow it to dry, depending upon the local temperature
  • Bond to match all the edges
  • Apply desired pressure for few minutes
  • Final curing after 24 hours
  • Do not shift, realigned or reopen the substrates once bonded, as it will break or damage the adhesive film
  • Store under dry condition below 35°C
  • Keep away from Naked flame
  • Keep the lid closed when not in use
  • Do not dilute or add anything in the product
  • Harmful if consumed

Start typing and press Enter to search